10% DISCOUNT FOR BOX QUANTITES (15)
DISCLAIMER: Please note that the colours depicted on the following chart are for guidelines only due to Variances in computer graphics cards and/or monitors setup. For more accuracy view a hard copy RAL Colour Chart. We can't be held responsible for any mis-match as the accuracy of each computer screen our users view our website with will vary. To ensure optimal results, we recommend a compatibility test between the sealant and the surface.
Product Description :
Silirub Color is a high-quality neutral cure elastical one-component joint sealant based on silicones. It has especially been developed for colour matched sealing’s based on the RAL System colours.
Characteristics :
- Very easy application
- permanent colours, UV-resistant,
- stays permanently elastic after curing
- available in a wide range of RAL System colours
- very good adhesion on many materials
- low modulus
- high gloss finish
Applications :
- all building- and construction joints which require a colour matched sealant
- all glazing works on powder coated aluminium, PVC, painted wood
- top sealing at glazing jobs on powder coated aluminium, PVC, painted wood, etc
- joints with high movement between different building materials
- sealings between painted wood, PVC, powder coated aluminium, etc and brickwork, concrete, etc.
Packaging : cartridges of 310 ml
Shelflife :
1 year in unopened packaging in a cool and dry storage place at temperatures
between + 5°C and +Color5°C
Technical Data :
Base : Polysiloxane
Consistency : stable paste
Curing System : Moisture Cure
Skinning time : ca 5 minutes (20°C/65 R.H)
Curing time : ca 2mm/24 hours (20°C/65 % RH)
Hardness : 22 +- 5 Shore A
Shrinkage : none
Specific Gravity : ca. 1.03
Temperature Resistance : -60°C until +180°C
Elastical Recovery : > 80%
Elongation at Break : 800 % (DIN 53504)
Elasticity Modulus 100%: 0.33 N/mm² (DIN 53504)
Maximum deformation : 25 % +/- (overall movement 50%)
Maximum tension : 1.20 N/MM² (DIN 53504)
Surfaces :
Substrate : all usual building surfaces except PE, PP
State of Surface : clean, dry, free of grease
Preparation :
To ensure optimal results, Soudal recommends a compatibility test between Silirub Color and the surface.
Joint Size :
Minimum Width : 5 mm
Maximum Width : 30 mm
Minimum Depth : 5 mm
Recommendation: 2 x depth = width
Application :
Application Method : caulking gun (hand or pneumatic)
Application Temperature: +1°C - +30°C
Clean with : White Spirit immediately after application
Finish with : Soapy water before skinning
Repare with : Silirub Color
Transport Information :
Silirub Color is considered non-hazardous for all means of transport.
Labeling:
No hazardous labeling required.
Safety Measures :
Apply the usual hygienic measures
Remarks :
Chemically completely neutral (pH = 7) Technical Norms / Conforms with :
- France : "Mastic Elastomère 1ère cat. sans primaire sur verre, alu et béton (label SNJF)
- Germany : DIN 18540 Teil Color - DIN 18545 Teil 2 Dichtstoffgruppe E
- United Kingdom : BS 5889 Type A
Remark : The directives contained in this documentation are the result of our experiments and of
our experience and have been submitted in good faith. Because of the diversity of the materials
and substrates and the great number of possible applications which are out of our control, we
cannot accept any responsibility for the results obtained. In every case it is recommended to
carry out preliminary experiments.
DELIVERY COSTS & INFORMATION
SEALANT COVERAGE CHART
GENERAL INFORMATION
