Please Note: Press on 'Zoom' under neath the tumbnail to enlarge the colour pallet.

DISCLAIMER: Please note that the colours depicted on the following chart are for guidelines only due to Variances in computer graphics cards and/or monitors setup. For more accuracy a sample tube may need to be purchased before buying a larger amount. We can't be held responsible for any mis-match as the accuracy of each computer screen our users view our website with will vary. To ensure optimal results, we recommend a compatibility test between the sealant and the surface.

Product:
Silirub 2/S is a high-quality neutral, elastic onecomponent joint sealant based on silicones.

Characteristics:
- Very easy application
- Permanent colour, UV-resistant
- Stays elastic after curing
- Very good adhesion on many materials
- Low modulus

Applications:
Joints in sanitary applications and kitchens
All glazing works
Joints in container and cold-storage applications
Air conditioning sealing

Packaging:
Colour: clear, white, grey, lightgrey, transparent grey, bahama beige, jasmin, manhattan, brilliant white, other colours available on request

Packaging: cartridge 310mL, on request sausages 310mL and 600mL

Shelf life:
12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°.

Surfaces:
Type: all usual building surfaces
State of Surface: clean, dry, free of dust and grease

Preparation: Porous surfaces in water loaded applications should be primed with Primer 150– no primer required for non porous surfaces.

We recommend a preliminary compatibility test.

Joint Size:
Minimum Width: 5mm
Maximum Width: 30mm
Minimum Depth: 5mm
Recommendation: 2 x depth = width

Application:
Method: caulking gun
Application temperature: +5°C to +35°C
Clean: with white spirit immediately after use
Finish: with soapy water before skinning
Repair: with Silirub 2S

Remark: The directives contained in this documentation are the result of our experiments and of our experience and have been submitted in good faith.
Because of the diversity of the materials and substrates and the great number of possible applications which are out of our control, we cannot accept any responsability for the results obtained. In every case it is recommended to carry out preliminary experiments.

Health- and Safety Recommendation:
Apply the usual industrial hygiene. Consult the label for more information.

Remarks:
Chemically completely neutral (pH=7).
Do not use on natural stones (like marble, granite,…). Use here Silirub MA instead.

Technical Norms/Conforms with:
- Belgium: ATG 1808 (NIT 107)
- Rapport IANESCO 3812-label alimentaire for applications in food surroundings
- Rapport IANESCO 551, conformity to FDA CFR 21 §177.2600 (e)
- France: “Mastic Elastom